CNC table made entirely from reclaimed 3/4″ pine boards along with some plywood for the top and the drawers. I chose nice 3/4″ hardwood plywood for the top because I wanted the top to be as flat as possible to reference off of. This has been on my to-do list since I moved into the new shop – the X-Carve …
Spalted Beech Bowl
Bowl turned from the wood of a historic 150 year old beech tree
Cement USB Hub
This is part of the USB Hub Challenge. Check out Giaco Whatever’s channel – this all started with his Cement USB Hub build on the Make Magazine channel. There was a lot of animosity in response to that video, so a bunch of us decided to get together and turn it into something positive. Be sure to check out the …
Epoxy Wire & Wood Bowl
This bowl is a wedding present for my sister and brother-in-law. The base of this bowl is made from spalted beech from a fallen branch off of a 120 year old beech tree. I had a busted ethernet cable that I ripped open and embedded in a two-part epoxy (he is an electrical engineer). The top segmented rings are made …